|
The machine for cutting large amount, high accuracy requirement and
development and design. Can be a single or multiple overlapping, and cutting at
the same time. Saw cut surface is bright and clean without burr, without
secondary processing. Suitable for cutting all kinds of nonferrous metal,
aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC,
wood, organic glass and carbon fiber material, especially suitable for
aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS,
network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell
type display equipment, aluminum furniture, aluminum extrusion and precision
cutting of different profile.
1. NC controller and touch screen are used for easy operation and fault
detection.
2. Automatic feeding, automatic clamping, automatic oil spraying and
automatic sawing.
3. Automatic feeding stroke of1400mmcan feed the material to the overpass.
4. Saw blade horizontal saw cutting, suitable for wide and large material
processing.
5. High precision ball screw driven by servo motor.
6. Oil production pressure push in the feeding mode, high sawing
stability.
7. The fixture on the feeding table is 2 sets of upward pressure and 2
sets of lateral pressure, suitable for irregular material sawing and several
pieces of material sawing at the same time.
8. Special cutting action design: after saw blades linear cutting
materials, controlled by the air compressor cylinder will work platform, after
pulling open saw blades back to the origin. This feature is in the process of
machining, in order to avoid material affected by the saw blade knife back and
surface smoothness and accuracy are specially designed, so that materials
processing surface more smooth and more accurate, precision improved.
9. The processing machine will automatically have no material induction or
can choose to set the length of the tail material.
Materials may be placed side by side and overlapped.Special sawing action
design feeding mode :1. Feed to cover 2. Manual feeding.
|
Model
|
ZG-610FAL/NC
|
|
Cutting ability WxH
|
200x200,210x175,350x130,400x40 Depending on the size of the saw blade
|
|
Servo drive system
|
Ball screw
|
|
The longest feeding trip
|
1400mm
|
|
Automatic feeding accuracy
|
±0.1 mm
|
|
Saw blade
|
2000 r.p.m.
|
|
Machine motor
|
10HP( optional 15 HP)
|
|
Servomotor horsepower
|
1 KW
|
|
Hydraulic pump motor
|
3 HP
|
|
The touch screen
|
7 "
|
|
Blade size
|
14"~24" (1" The
aperture )
|
|
Operating air pressure
|
6 kg/cm2
|
|
Machine dimension
|
3500 x 2100 x1860 mm
|
|
Machine weight
|
2300 kgs
|
Standard configuration: one dust collector, one alloy saw blade, one kit
|
